Sigma 688 ST

类　　型：: 绞线机

品　　牌：: Komax

颜　　色：: 其它

产品描述：: Sigma 688 ST 实现了从加工和扭绞到对明线末端进行点编带的全自动化整个过程。它是第一个满足 OEM 质量要求的自动化解决方案，用于全自动绞线机中的 UTP（非屏蔽双绞线）点编带。经济集成和自动化，它可以在一个步骤中处理两条单线（散装货物）。同时，模块化系统结构提供了最大的灵活性，六个工位用于工艺模块以及一个捻线工艺和一个由两个点包带模块组成的点包带单元。

Length range	700 – 4,000 mm (27.6 – 157.5 in)
	700 – 7,000 mm (27.6 – 275.6 in)
	700 – 10,000 mm (27.6 – 393.7 in)
	Optional 150 mm (5.9 in)
	End length of twisted wires (with active spot taping module from 300 mm [11.8 in])*
Length accuracy	±(0.1 % + 1 mm [0.04 in])
Stripping lengths	Side 1: 0.1 – 18 mm (0.004 – 0.7 in)
	Side 2: 0.1 – 28 mm (0.004 – 1.10 in)
	with short open ends processing set
	Side 2: 0.1 – 28 mm (0.004 – 1.10 in)
	with open ends standard processing set
Wire cross-sections**	2 × 0.22 mm² – 2 × 1.0 mm² (AWG 24 – 17)
	with short open ends processing set
	2 × 0.22 mm² – 2 × 2.5 mm² (AWG 24 – 14)
	with open ends standard processing set
	Optional with feasibility test from 0.13 mm² (AWG 26)
Open wire ends* (specifications without end processing)	15 – 99 mm (0.6 – 3.9 in) with short open ends processing set
	30 – 99 mm (1.2 – 3.9 in) with open ends standard processing set
	30 – 125 mm (1.2 – 4.9 in) with long and unequal length open ends processing set on side 1
Pitch length	5 – 80 mm (0.2 – 3.2 in) programmable
Pitch length	Accuracy: ±10 %, max. ±5 mm (0.2 in)
Spot tape position	Last intersection point (default position)
Spot tape position	of 0.0 mm – 80 mm (0.0 – 3.1 in) in direction of wire center
Wire draw-in speed	max. 5 m/s (16.4 ft/s)
Noise level
Electrical connection	3 × 208 – 480 V / 50 – 60 Hz / 10 kVA
Compressed air connection	5 – 8 bar (73 – 116 psi)
Recommended operating	6 ± 0.5 bar (87 ± 7.25 psi)
pressure***	6 ± 0.5 bar (87 ± 7.25 psi)
Weight	incl. 2 crimp and 2 seal modules
	Sigma 688 ST / 4 m: approx. 2,800 kg (6,173 lb.)
	Sigma 688 ST / 7 m: approx. 3,400 kg (7,496 lb.)
	Sigma 688 ST / 10 m: approx. 4,000 kg (8,818 lb.)

* Producible parameters depend on pitch, outer diameter and end processing. The producibility must be assessed with the software producibility check or a feasibility test.
** Certain extremely hard, tough wires may not be able to be processed even if they are within the indicated cross-section range. If in doubt, we produce samples of your wires.
*** Outside of the recommended operating pressure, the correct function of peripheral devices may be limited. Be sure to follow the technical data of the peripheral devices as well. The maximum permissible operating pressure depends on the ambient temperature. 6.5 bar to 40 °C / 6 bar over 40 °C.

推荐文章

视频课程

Sigma 688 ST

评论