Kappa 340

类　　型：: 剪剥设备

品　　牌：: komax

颜　　色：: 其他

产品描述：: 多功能 Kappa 340 是应对现代线材加工的所有挑战的理想之选，无论是现在还是将来：它具有标准的强大双切割头和旋转切口装置。结合其高扭矩皮带传动装置，它可以快速有效地处理复杂的加工序列。两级长度测量系统即使在最困难的加工情况下也能确保精确的线材加工。Kappa 340是速度、效率和可靠性的代名词。凭借直观的操作、先进的技术和创新的改进，Kappa 340 是一项安全的投资。

	Kappa 340 with RIU	Kappa 340 without RIU
Wire cross section*		0.22 – 70 mm²/ AWG24 – 2/0	0.22 – 70 mm²/ AWG24 – 2/0
Max. outer diameter		16 mm (0.63 in.)	16 mm (0.63 in.)
Wire length accuracy		Length tolerance ±(0.2% +1 mm [0.039 in.])	Length tolerance ±(0.2% +1 mm [0.039 in.])
Max. wire transport speed		4.0 m/s (157.5 in./s)	4.0 m/s (157.5 in./s)
Flat wire processing		Optional 16 mm (0.63 in.)	Optional 16 mm (0.63 in.)
Inner conductor processing		4 × 0.35 mm² to 3 × 2.5 mm² / 4 × AWG22 to 3 × AWG13*	4 × 0.35 mm² to 3 × 2.5 mm² / 4 × AWG22 to 3 × AWG13*
Wire length range (short mode possible)		1 mm (0.039 in.) – 800,000 mm (874.89 yd.)	1 mm (0.039 in.) – 800,000 mm (874.89 yd.)
Max. stripping lengths*	Full strip	Side 1: 260 mm (10.2 in.)	Side 1: 260 mm (10.2 in.)
		Side 2: 135 mm (5.3 in.)	Side 2: 135 mm (5.3 in.)
	Half strip	Side 1: 999.9 mm (39.37 in.)	Side 1: 999.9 mm (39.37 in.)
		Side 2: 999.9 mm (39.37 in.)	Side 2: 999.9 mm (39.37 in.)
	Semi strip	Side 1: 999.9 mm (39.3 in.)	Side 1: 999.9 mm (39.3 in.)
		Side 2: 999.9 mm (39.37 in.)	Side 2: 999.9 mm (39.37 in.)
Center strip	Number/length	Programmable (no restriction in terms of number and length)	Programmable (no restriction in terms of number and length)
Rotary incision	Programmable incision diameter on one or more wire layers	Standard	Retrofittable
Monitoring	Wire and wire feed monitoring, zero-cut optimization, automatic cross-sectional and outer diameter measurement	Optional	Optional
Length measuring system	Precise rotary incision positioning, precise cutting to length, automatic length correction in case of diameter loss due to belt or roller wear, wire slip compensation and wire end detection	Standard	Standard
Wire transport system	Multiple supported belt drive	Yes	Yes
IOCS interfaces	(expandable)	3 (6)	3 (6)
USB	Data backup, software updates, CSV import of product and wire data	Yes	Yes
Networking	Control center, WPCS, TopWin Kappa	Optional	Optional
Storage capacity		Tens of thousands of products	Tens of thousands of products
Electrical connection		110/230 VAC ±10% – 50/60 Hz 650 VA	110/230 VAC ±10% – 50/60 Hz 650 VA

* Kappa machines can process many wires outside the indicated cross-section range. It may not be possible to process some extremely hard, tough wires, even if they are within the indicated cross-section range. If in doubt, we are happy to provide you with samples of your wires.

屏幕截图 2022-09-20 135520.jpg

推荐文章

视频课程

Kappa 340

评论